98 replies to this topic

[steveboiboi]

ok so ive had the car a while...

for some reason never made a build thread on here...

did on another forum, so im going to copy and paste the entire build/what ive been doing so bare with and ignore anything where it may not make sense..







heres how i got it

some of you may had seen my is200 i had.. and learnt to skid in it and then i swapped it for this!







has a pretty heavy spec...


1JZ freshly taken from an auto soarer with 60k on clocks, so never been abused
new belts, gaskets,
new engine mounts
fresh coolant, oil and all fluids etc
rare factory manual ecu and clocks
HKS spark plugs
HKS Fuel pump
HKS Priest Titanium exhaust
big front mount intercooler, metal pipework
Yashio factory rad and rad cap
twin electric fans
engine earthing kit
SARD Silicone piping throuout (new)
r154 gearbox
brand new HKS pro twin plate clutch, (£2k worth)
HKS lightweight flywheel
braided clutch line
TRD 2 way LSD
TRD 4.6:1 Final drive set (new)
Cusco catch can
ABS deleted, complete new lines made
Traction control completly deleted also






FOOTWORK


Apexi N1 40 point asjustable coilovers
TRD 3 arm rear set (new)
TRD front and rear ARBS
Yannack rear member locking collars (new)
Tein steering arms and spacers
MHC super angle spacers and corretion spacers (new)
Cusco front strut bar (under bracing)
Cusco chassic support frames
mkiv supra brakes. braided lines


ELECTRONIC


GReddy boost gauge
GReddy water temp gauge
GReddy oil temp gauge
GReddy oil pressure gauge
triple gauge holder jzx90 specific
turbo timer
blitz speed limiter defencer
seriously pimp carrozeria speakers, with matching wood trim from interior


INTERIOR
bride bucket seat drivers side
standard passenger seat
bride super low drivers subframe
bride doorcards all round
full interior and rear bench modified to fit round cage
fire ext
snap off hub
dished naardi wheel
mitto spec gearknob
Yannak fly off handbrake button
Cusco half roll cage
broadway wide rear view mirror




WHEELS + TYRES
ROTA grid drift 18x10 et12 all round
with good federal 595 RSRS
25mm H+R hubcentric bolt on spacers rear


AERO & LIGHTING


Car Modify Wonder SHADOW complete kit (seriously rare kit, the best you can get for a jzx, cost a fortune)
D-max carbon D1 bonnet (new)
gandor mirrors
Unknown aftermarket bonnet grille, meshed
Origin front wide fenders (new)
Origin Carbon 3D wing (new)
240Z wide fender extentions (65mm (rears) + 35mm (fronts)) (new)
Car Modify Wonder clear winker set (new)
Car Modify Wonder Clear headlight set (new)
Koito headlight conversion
HID lights (new)
Custom cannards and diffusers (new)
[/SIZE]


Changed since then:


+Spoilerless and bootlid sticker bombed.
+New spark plugs and coilpacks
+Rear arches tubbed
+Arc wonder ali air filter box (not fitted but included)
+oil leak fixed and oil and filter change done 200 miles ago
+new thermostat plus coolant bleed and change
+DW magnetic sump plug
+Brand new JVC double din head unit, full ipod connectivity etc.
+Brand new battery with 3 year warranty.
+Boost issue when I first got the car fixed, front turbo replaced with one supplied by garage D.
+Aerocatches fitted to carbon bonnet.


A couple of things need to be done to the car for it to be perfect:


+Needs a paintjob to be fully badass.
+Master cylinder needs to be replaced I THINK (clutch sometimes sticks)
+ Some form of fuel cut defender as it can hit fuel cut when it boosts past .9bar ( restrictor ring supplied so would be half hour fix)
+ A couple of bits of wiring to make the HIDS work properly and all the gauges ( just boost working atm but senders supplied for the others)


It is a savage car and makes me smile everytime I drive it, and spins up federal 595's as if you were driving on ice.


Car comes with 9 and a bit months MOT 3 and a bit months tax!!


Temperatures always stayed the same, starts first time, awesome car!

[steveboiboi]

got the HID's working all good.. and havent hit the fuel cut that was mentioned in the ad just as of yet.. but got a restrictor ring to fit sometime..

horn all working now and it has a power steering leak... so i know this might seem a bit extreme.. but the engines coming out just so i can see/check if there is anything else that need doing.. and it stops me taking it out for a naughty drive with no insurance etc... haha!

the engines pretty much ready to be pulled from the mounts now... i know a threads pretty useless without pictures.. but been pretty ill and not got many at the mojo and wasted a few days not doing anything..

[steveboiboi]

some pictures of it on the way home...







and some pictures of it getting stripped down (is a bit further at the mo but no recent pictures)







hope to get it out and seal anything i need and get it all ready for some abuse!

and ill get plenty of vids/pictures of it skidding so dont worry

sometime i want to get a paint job on it .. although as it is it seems to suit its character like its going to eat you!

[steveboiboi]

rush out to work update....

basically wanted to paint my cage... got no flicks of me painting it.. but sanded it and primed it and heres a before and after!





after





and re painted my boot lid and filled some holes where a spoiler was and was stickered up and was a mess..

my paint job is streaky and shit... but its a temp measure







in that last flick the car is filthy...

enjoy!!!! off i go!

[steveboiboi]

well finally got the engine out...

geting it ready



hooking it up



pulllllll..... and pop.. out she comes..






then made a big ass list of things to do while it was out... some not needing to be done but others were more important..



then after getting a quote from toyota for the bits minus the fluids etc... for £900+ i thought id skimp down the list...

now just waiting for a power steering pump seal set, gasket set for the entire engine,oil filter,cam belt and tensioner..

and that was still £300+ and i still need fluids and to seal the power steering rack...

so gonna take the rack apart next and juts buy a random copper washer kit and see what i can match up..

then still have the problem of the clutch pedal not returning properly when i go balls out.. only doesnt return by 20mm or so but i have to return it with my foot.. any ideas? could it either be clutch master cylinder or slave... or something to do with the twin plate clutch? or just not being bled properly.. heard they can be a bugger to bleed? any ideas would be helpfull!



now just waiting on bits for the next update!

[steveboiboi]

right... parts are taking to long...

so heres some pictures of splitting the engine up bit by bit.. bareing in mind ive not done this before just getting help from a mate..

seperated the sump ready to re seal






OHHH HELLO HKS CLUTCH







and took the rocker covers off.... and it was full of shit and sludge.. so its all coming apart and getting cleaned
as the head gaskets getting done

[steveboiboi]

oh and random shot of it in japan getting loaded into a container!

[steveboiboi]

yeah pretty much found what i need now and its on the way..

started to strip the engine down.. inlet manifold and that was easy to rip off...

but the turbos were interesting and still havent done it.. but not sure what this clamps called but i pulled it and it fell off
and left a gap between the turbos.. found it had no nuts on it.... guessing she would had been loosing plenty of boost..



heres the clamp?




that was it for the day and waited for bits to turn up...

today,.. cambelt and cambelt tensioner and the power steering pump seal set turned up...



now.. bearing in mind i have pretty much bugger all knowledge of anything mechanical and im just having a go..

i decided to take the power steering pump apart and re-seal it!

seal set



how shitty it was at the start... ewww (kind of took over the kitchen worktops.. haha)





and then just started taking the pump to pieces trying to match the seals i had in the bag..







then started to clean it all up and heres the end result





some bits looked new



then seeing all the cases and covers... kind of thought it was a shame not to paint it
so masked or bits that looked like they wouldnt like paint in them..





hung bits up





and then primered them





and how my kitchen looked after...



so tomo going to paint the primered bits black... and then re build it all with the new seals and hope it works!

[steveboiboi]

well painted all the bits that i primered yesterday...









then re built it bit by bit

first off was a new oil seal




then to set up ready to push the bearing in





bearing pushed in and new cir-clip



and then other bits which i dont know what they are called..



then im going to call this the pump fin housing??



fins going in (was quite cool to see how it all worked)





and then a washer thing which keeps tension (thought it was buggered when i first took it appart)



more new seals



and one fresh newly sealed pump





fingers crossed it works as it should when it all goes back on..

hopefully more work going on in the engine next!

[steveboiboi]

right basically not much of an update.. still waiting on the friggen gaskets....

but basically got the turbos off

and heres how it looks at the moment..







and now im not to sure on this... oil in the inlet of the turbo.. should i be worried? things to check?







need to get the cams out and then the head off and wait for my gaskets to arrive....