69 replies to this topic

[go100go]

Ohh sweet! Cheers Ray!

[VIPJZX]

70URA, on Jan 10 2007, 01:25 PM, said:

I changed my brake rotors and pads nearly 2 years ago. I went DBA 4000 series jza80 supra rotors, but word of warning, all measurements are the same except the jzx90 brake rotors has a smaller inner diamater where the handbrake shoe touches. Because of this i have no handbrake as even fully adjusted out, they still don't touch the inside of the rotor on the DBA4000 rotor. I'm talking with the manager of DBA at the moment to see what he can do. Hopefully should be able to come up with something. If anyone else wants to try, the more the merrier, but just thought i'd let people know

This applies for the JZX90 not sure about JZX100

yep, I got the same problem with using RDA brand rear rotors...

[Chasersaurus]

Herrrro! I'm currently looking to upgrade my brakes, but am looking to go for a brembo setup from second hand porsche bits and pieces. Looking at a 6pot brembo caliper from a Cayenne and a 4pot from a boxter.

Take a look here: Cheap Brembo's

Do you guys reckon it is possible to adapt these to our 100's, with new rotors n shit of course! Cause these are piss cheap!!

[Torabi]

S0unIQ, on 14 March 2010 - 11:27 PM, said:

Raf looks like its the correct part is 04466-22150

http://www.toyodiy.com/parts/p_J_1999_TOYO...BTMVZ_4707.html

Confirmed on these pads. As expeted I guess.

Confirmed on DBA 4748SL/R as well. Used Bendix front pads can't remember the number's atm, but they have them listed in the Bendix book.

Edited by Torabi, 21 February 2011 - 10:55 PM.

[Xxis]

today i went and got bendix pads for the rear, its in their new books, under chaser.
could not find a listing for rotors though... does anyone know if anyone is doing them in australia yet?

[WPN90]

I still dont think there is anything availble for rear yet, i have a pair on order from north shore toyota.

[eck0]

May I suggest, if you go for the DBA/RDA replacement rotors, You will need to get the hand brake shoes relined. Same problem with running JZA80 rear rotors, you will need to reline the handbrake shoes (9MM of friction material recommended).

[Tats]

I also ordered a set of stock rear rotors from NS Toyota - seriously CBF with rotors that aren't designed for our cars. I haven't fitted them yet, might see if RDA are interested in getting their measurements before I do.

[FragLord]

Dixcel make rear rotors for JZX100 and are in stock at Japanese Import Spares for $240 for a pair

[WPN90]

oh well genuine toyota rotors for 315ish shipped, would have bought those others but couldnt find any info before so they must not be very well advertised, atleast i know the genuine rotors will fit 100% correct