Forum Advertisements

[phoenix10]

Hey just attempting to pull the door cards off for some work, so far I've:

• Popped all push clip things out
• Removed 2 screws behind window switch
• Covered screw holding handle surround
• Covered screw where door meets dash

buuut it seems to be stuck on the door handle surround - have tried levering it off (with a fair bit of force) at either end but no luck, don't really want to break anything so does anyone know exactly how it should come off?

cheers

Edit: Nevermind found the info under JZX100 forum - much the same although 110s do not have the external plastic pins at the rear of the door.
http://www.jzx100.com/forum/index.php?showtopic=6323

This post has been edited by phoenix10: May 16 2010, 09:00 PM

[Brennos]

Hey just attempting to pull the door cards off for some work, so far I've:

• Popped all push clip things out
• Removed 2 screws behind window switch
• Covered screw holding handle surround
• Covered screw where door meets dash

buuut it seems to be stuck on the door handle surround - have tried levering it off (with a fair bit of force) at either end but no luck, don't really want to break anything so does anyone know exactly how it should come off?

cheers

Edit: Nevermind found the info under JZX100 forum - much the same although 110s do not have the external plastic pins at the rear of the door.
http://www.jzx100.com/forum/index.php?showtopic=6323

The door handle surround is clipped onto the actual handle. It's a mongrel to get off, if you slid a small flat-head in to the upper part between the surround and the lever it pops off. I have done it a few times, Can you pm me a pic of your door card, so I can point it out to you. This had me buggered for a good hour before I fluked it. I don't actually have a jzx, but work on one for a mate, or i would show you a pic myself.

EDIT: I re red your post and realised you found it. As you were (IMG:style_emoticons/default/tongue.gif)

This post has been edited by Brennos: Jun 26 2010, 03:53 PM

[Google Bot]